The HS-85BB features a high power motor for greater speed and torque. The HS-85BB is the choice of modelers looking for a high performance servo without breaking the bank. The ball bearing supported output shaft and sturdy gear trains are preferred for smaller glow and electric airplanes, helis and sail planes.
Features
- High Torque and Precision Centering
- Strong Resin Gear Train
- Ball Bearing-Supported Output Shaft
- Perfect for Applications where a Standard Servo is too Heavy or Large but Standard Torque is Required
Performance Specifications |
---|
Operating Voltage Range (Volts DC): | 4.8V ~ 6.0V |
Speed (Second @ 60°): | 0.16 ~ 0.14 |
Maximum Torque Range oz. / in.: | 42 ~ 49 |
Maximum Torque Range kg. / cm.: | 3.0 ~ 3.5 |
Current Draw at Idle: | 8 mA |
No Load Operating Current Draw: | 280 mA |
Stall Current Draw: | 1,200 mA |
Dead Band Width: | 8 us |
Physical Specifications |
---|
Dimensions (Inches): | 1.14 x 0.51 x 1.18 |
Dimensions (Metric): | 29.0 x 13.0 x 30.0 |
Weight (Ounces): | 0.67 |
Weight (Gram): | 19.2 |
Circuit Type: | HT7003 Analog SMT |
Motor Type: | 3 Pole Metal Brush Ferrite |
Gear Material: | Nylon |
Bearing Type: | Top Ball Bearing |
Output Shaft (type / 0mm): | Standard 24 |
Case Material: | Plastic |
Dust / Water Resistance: | N / A |
Connector Gauge (AWG) / Strand Count: | 28 / 20 |
Radio Control Applications |
---|
Parkflyer: | N / A |
Sport Plane: | >40% |
Sailplane: | N / A |
3D Performance: | N / A |
Scale: | >40% |
Electric Helicopter: | N / A |
Gas Helicopter: | N / A |
On Road: | 1/4th & 1/5th |
Monster Truck: | 1/4th & 1/5th |
Buggies: | 1/4th & 1/5th |
Truggies: | 1/4th & 1/5th |
Short Course / Truck: | 1/4th & 1/5th |
Crawlers: | N / A |
Sail Boat: | N / A |
Power Boat: | N / A |