The HS-805MG heavy duty supersized servo was designed to handle the punishment dished out by the latest wave of large 1/5th scale vehicles. With big gears in a big case powered by a big motor this servos was designed to take abuse and keep on going.
Features
- Large 8mm Output shaft
- Dual Ball Bearings
- Heavy Duty Metal Gear Train
- Water and Dust Resistant Case
Performance Specifications |
---|
Operating Voltage Range (Volts DC): | 4.8V ~ 6.0V |
Speed (Second @ 60°): | 0.22 ~ 0.18 |
Maximum Torque Range oz. / in.: | 275 ~ 343 |
Maximum Torque Range kg. / cm.: | 19.8 ~ 24.7 |
Current Draw at Idle: | 8 mA |
No Load Operating Current Draw: | 520 mA |
Stall Current Draw: | 6,000 mA |
Dead Band Width: | 5 us |
Physical Specifications |
---|
Dimensions (Inches): | 2.60 x 1.18 x 2.27 |
Dimensions (Metric): | 66.0 x 30.0 x 57.6 |
Weight (Ounces): | 6.95 |
Weight (Gram): | 197 |
Circuit Type: | HT7003 Analog MosFet |
Motor Type: | 3 Pole Carbon Brush Ferrite |
Gear Material: | Metal |
Bearing Type: | Dual Ball Bearing |
Output Shaft (type / 0mm): | Mega 15 |
Case Material: | Plastic |
Dust / Water Resistance: | Splash Proof |
Connector Gauge (AWG) / Strand Count: | 22 / 60 |
Radio Control Applications |
---|
Parkflyer: | N / A |
Sport Plane: | N / A |
Sailplane: | N / A |
3D Performance: | N / A |
Scale: | 30-40% and >40% |
Electric Helicopter: | N / A |
Gas Helicopter: | N / A |
On Road: | 1/4th & 1/5th |
Monster Truck: | 1/4th & 1/5th |
Buggies: | 1/4th & 1/5th |
Truggies: | 1/4th & 1/5th |
Short Course / Truck: | 1/4th & 1/5th |
Crawlers: | N / A |
Sail Boat: | =>1M+ & Scale |
Power Boat: | 1/5th & Up |