A digital version of one of Hitec's most popular mini servos the HS-5085MG offers excellent centering, resolution and durability for those looking to save weight without sacrificing performance. A popular servo for smaller airplanes, heli's, boats, cars and trucks, the HS-5085MG offers a fine balance between speed and torque.
Features:
- Standard Servo Performance from a Micro Servo
- Rugged Metal Gears
- Ball Bearing-Supported Output Shaft
- Standard Programmable Digital Circuit
- Stronger Holding Power than the Analog Version
Programmable Functions:
- End Point Adjustments
- Direction
- Fail Safe
- Dead Band
- Speed (Slower)
- Data Save / Load
- Program Reset
Performance Specifications |
---|
Operating Voltage Range (Volts DC): | 4.8V ~ 6.0V |
Speed (Second @ 60°): | 0.17 ~ 0.13 |
Maximum Torque Range oz. / in.: | 50 ~ 60 |
Maximum Torque Range kg. / cm.: | 3.6 ~ 4.3 |
Current Draw at Idle: | 3 mA |
No Load Operating Current Draw: | 290 mA |
Stall Current Draw: | 2150 mA |
Dead Band Width: | 2 us |
Physical Specifications |
---|
Dimensions (Inches): | 1.14 x 0.51 x 1.18 |
Dimensions (Metric): | 29.0 x 13.0 x 30.0 |
Weight (Ounces): | 0.77 |
Weight (Gram): | 21.9 |
Circuit Type: | G1 Programable Digital |
Motor Type: | 3 Pole Metal Brush Ferrite |
Gear Material: | Metal |
Bearing Type: | Top Ball Bearing |
Output Shaft (type / 0mm): | Standard 24 |
Case Material: | Plastic |
Dust / Water Resistance: | N / A |
Connector Gauge (AWG) / Strand Count: | 28 / 20 |
Radio Control Applications |
---|
Parkflyer: | < 50 oz. |
Sport Plane: | 42 - 50 oz. |
Sailplane: | <2 meter / DLG |
3D Performance: | N / A |
Scale: | N / A |
Electric Helicopter: | N / A |
Gas Helicopter: | N / A |
On Road: | 1/16th |
Monster Truck: | N / A |
Buggies: | 1/16th |
Truggies: | N / A |
Short Course / Truck: | 1/16th |
Crawlers: | N / A |
Sail Boat: | N / A |
Power Boat: | 1/16th |